Trouser Measurement & Grading Template

Fabric, Waistband, Pocket, Pleat & Size Grading for Woven Trouser Orders

Complete this template before submitting your trouser or pants RFQ. Waistband construction and seat/thigh proportions are the most revision-prone specifications in trouser development.

Fabric Specification

Fabric construction (chino twill / ponte / stretch twill / linen / linen-cotton — specify) •

Fibre content (100% cotton / cotton-elastane / linen-cotton — specify ratio) •

GSM (180–220 lightweight / 230–280 standard / 280+ heavy — specify) •

Colour (solid / stripe — Pantone if solid) •

Finish (wrinkle-resistant / none) •

Waistband & Closure

Waistband style (standard / extended waistband / elasticated back — specify) •

Waistband height (standard: 3.5–4.5 cm — specify) •

Belt loops (yes / no — specify count and width) •

Closure (button + zip / hook + bar + zip / elasticated — specify) •

Fit & Pleat

Fit (slim / straight / relaxed / tailored — specify) •

Rise (low / mid / high — specify cm if exact) •

Pleat (flat front / single pleat / double pleat — specify, and direction if pleated) •

Leg taper (none / slight taper / strong taper — specify) •

Pockets

Front pockets (slant / on-seam / none — specify) •

Rear pockets (button welt / zip welt / patch / none — specify, both sides or one) •

Watch/coin pocket (yes / no) •

Size Grading — Key Points of Measure (cm)

Measurement	W28	W30	W32	W34	W36	W38	W40	W44
Waist (at waistband, relaxed)
Hip (7" below waist)
Rise (front)
Rise (back)
Thigh (1" below crotch)
Knee
Leg opening
Inseam length

Packing

Hung / folded (specify) •

Polybag per piece (Y/N) •

Pieces per carton (standard: 12 pieces) •

Certifications (OEKO-TEX / BSCI / Sedex — specify) •

Submit via mzglobaltrading.com/rfq/ or info@mzglobaltrading.com. Fabric guide at mzglobaltrading.com/knowledge/trouser-fabric-guide/.

Disclaimer: This document is provided for general information only and does not constitute legal, customs or compliance advice. Figures reflect common trade practice and are indicative — always verify against your buyer specification, applicable regulations and your destination market.