Question 1

What fabric constructions are used for reusable surgical gowns?

Accepted Answer

The primary construction for reusable surgical gowns is plain weave TC 65/35 poly-cotton at 140–160 GSM. The polyester content provides dimensional stability through repeated industrial laundering and autoclaving, while the cotton component ensures breathability and comfort for surgical staff. 100% cotton plain weave is specified where synthetic-free requirements apply — typically in markets with specific procurement standards. Reinforced critical zones (front panel, sleeve) use laminated or higher-GSM barrier fabric for fluid resistance in high-splash procedures. Non-woven polypropylene disposable gowns are also available for single-use programmes.

Question 2

What certifications are required for surgical gown procurement?

Accepted Answer

For hospital and surgical centre procurement in EU markets, EN 13795 (Surgical Drapes, Gowns and Clean Air Suits) is the applicable standard — covering liquid barrier performance, microbial penetration resistance and tensile strength under wet conditions. ISO 13485 (Medical Devices Quality Management) is increasingly required by procurement agencies and health ministries as a process quality standard. ISO 9001 covers general quality management. For ethical supply chain compliance, BSCI, Sedex and SA8000 are the standard audit frameworks. We can provide full documentation including factory audit reports, CE marking documentation and product test reports.

Question 3

Can logos be added to surgical gowns?

Accepted Answer

Yes. Embroidered logos are the standard decoration for institutional surgical gowns — typically placed on the left chest pocket or back yoke. Embroidery provides permanent identification that survives autoclave sterilisation cycles without degradation. Heat transfer labels are also available for hospitals requiring staff name or department identification. For government ministry procurement where neutral presentation is standard, plain ungarnished gowns are supplied without any applied decoration.

Question 4

What sizes are available for surgical gowns?

Accepted Answer

We supply surgical gowns from XS through 3XL in reusable constructions, with custom sizing available for programmes requiring specific measurements. Disposable non-woven gowns are typically supplied in one-size or L/XL formats. For institutional procurement, size ratios are specified in the purchase order — a common distribution for hospital bulk orders is XS: 5%, S: 15%, M: 35%, L: 30%, XL: 10%, XXL+: 5%, though your programme requirements may differ. Include your required size breakdown in the RFQ.

Question 5

What finishing treatments are applied to surgical gowns?

Accepted Answer

Standard finishing treatments for surgical gowns include: anti-bacterial finish (inhibits bacterial growth on fabric surface — relevant for reusable gowns in surgical environments); fluid/blood repellent finish (DWR-based barrier reducing liquid penetration on non-critical zones); anti-static finish (prevents static charge buildup in operating theatre environments with flammable gases). All finishes are applied using OEKO-TEX certified chemicals. For autoclave-compatible gowns, finish durability across repeated high-temperature sterilisation cycles is confirmed by test before bulk production.

Question 6

How are surgical gowns packed for institutional supply?

Accepted Answer

Bulk institutional supply: gowns are individually folded in sealed polybags and packed in cartons of 12 or 24 units by size. For sterile single-use disposable gowns: individually wrapped in sterile packaging with peel-open seal. For government ministry or hospital procurement requiring specific packing configurations, we accommodate custom pack quantities and labelling requirements. Carton marking includes item description, construction specification, size, quantity and country of origin as standard.

Question 7

What is the indicative lead time for surgical gown orders?

Accepted Answer

Lead times are indicative and subject to factory scheduling and order volume. As a general guide: sample production takes 12–18 days from specification and fabric approval; bulk production typically takes 35–55 days from purchase order placement. For orders requiring EN 13795 testing documentation, allow 10–15 additional days for third-party laboratory testing before shipment. Sea freight adds 20–35 days to destination. Government health ministry and institutional procurement programmes should allow a minimum of 90–120 days from RFQ to delivery.

Question 8

Are surgical gowns from Pakistan accepted in EU and US hospital procurement?

Accepted Answer

Pakistan's medical textile manufacturing base has supplied EU and US hospital procurement programmes for over two decades. For EU procurement, EN 13795 test reports and ISO 13485 certification are the primary compliance requirements — both available through our supply network. For US hospital purchasing organisations (GPOs) and IDNs, ISO 9001 and BSCI are the typical minimum requirements, with ISO 13485 increasingly specified in larger programme contracts. We provide full compliance documentation packages with every shipment.

Surgical GownManufacturerPakistan

Compliant Surgical Gowns for Institutional Procurement

Explore All Aspects

Fabric Constructions

Size Range

Finishing

Certifications

Decoration

Pack Formats

Buyer Sectors

Export Terms

OEM Programme

Compliance Documentation

Sourcing Process

Reusable & Disposable Construction Options

TC 65/35 Poly-Cotton (Reusable)

XS to 3XL — Custom Available

Typical Size Distribution for Hospital Procurement

Finishing Treatments

Anti-Bacterial

Fluid / Blood Repellent

Anti-Static

Autoclave Safe / Sterilisable

Certifications & Standards

Decoration & Labelling Options

Packing Options

Individual Polybag

5-Pack Institutional

12-Pack Carton

Sterile Individual Wrap

Bulk Carton

Buyer Sectors & Markets

Hospitals & Surgical Centres

Medical Supply Distributors

Government Health Ministries

Procurement Agencies

Export Incoterm Options

Compliance Documentation Package

OEM Programme Scope

Construction Specification

Custom Sizing

Colour Programme

Certification Package

Embroidered Identification

Custom Packing Format

From RFQ to Certified Delivery

Frequently Asked Questions

More Hospital Linen Products

Source Compliant Surgical Gowns from Pakistan

Surgical Gown
Manufacturer
Pakistan